Description The WMS 35/92 2 Hook 2 Roller Dual Spindle PVC Multipoint Lock is made for uPVC doors that lock by lifting the handle before turning the key. It replaces multipoint strips where the handle and cylinder follow a 92mm PZ centres. In addition, this lock provides a 62mm handle centre for doors that use a dual spindle arrangement. This lock is specifically selected when the handle position sits 35mm back from the door edge. For ideal installation, a 16mm square end faceplate runs the length of the strip and carries the locking points. The centre case sits in the middle of the strip and contains the latch and the deadbolt. Furthermore, one hook sits above the centre case while the other sits below it, and the hooks measure 1215mm between the top and bottom locking points. Additionally, two rollers are positioned along the strip to compress against the frame keeps. To secure the door along the frame, lifting the lever drives the hooks and rollers into their corresponding frame keeps. At the same time, the rollers apply pressure which helps pull the door tightly into the seals. A Euro cylinder passes through the centre case and secures the mechanism after the lift lever has been engaged. The spindle passes through the centre case using a dual spindle layout, and the handle centres measure 92mm and 62mm between the spindle and cylinder positions. We recommend regular maintenance to ensure the locks performance. Routinely check that the hooks enter the keeps without obstruction. In addition, lightly lubricate the latch, deadbolt, and hooks to support the lift lever’s movement. If you have any questions regarding your next multipoint door lock, contact a member of our sales team who are standing by to assist you.
